"The Felt conveyor belt is mostly used for cut and wear resistant application industries, likely automotive industries, sheet metal handling and tire industries.The conveyor belt is specially designed to work with all knife cutting tables & systems."
"This material is designed to allow the full vacuum power of the cutting table to hold materials firmly in place while also providing the durability needed for cutting tough industrial materials."
The antistatic types are used in electronic, optical and computer industry.
| Key words | |
| Novo felt conveyor belt | |
| Material | Novo material |
| Color | Black and green |
| Thickness | 2.5mm/4mm/5.5mm |
| Joint | Welded |
| Antistatic | 109~1012 |
| Temperature range | -10℃-150℃ |
| Size | Customized |
| Max width | 300mm |
| Certification | ISO9001 & ISO14001 |
| Application | Cutting table, paper industry & tyre industry |
Anti-static, flame retardant, low noise, impact resistance Splice Types: Preferred Wedge splice,others open splice Main features: Excellent sports performance, good abra sion resistance, low elongation, high electrical conduct! vity, excellent flexability Available : roll belt endless blet Pre-opening belt or bonding Note: Novo conveyor cutting underlay belt material can be cut to custom widths. Pleae contact me with your requirements.
Installing Cutting Machine Felt Belt is very Simple and Fast!
1. Wear Felt Belting on the machine
Pass Novo Belt through the bottom roller and place the open teeth on both sides of the cutting table to facilitate subsequent joints
2. The tooth weight is well pressed
After aligning Cutter Mat, use weights on both sides of the open teeth of the Felt Belts to prevent slippage.
3. Glue
Apply glue evenly around the diamond teeth. Pay attention to pad some waste paper when applying glue to prevent glue from leaking
to the table and block the air inlet.
4. The tooth bonding
After the glue is applied, align the two sides of the teeth and press them to level.
5. Press teeth to ensure neatness
Make sure that the teeth and teeth are aligned neatly to prevent deviations after the joint.
6. Hot pressing
Place a super long Teflon cloth under the joint, and adjust the industrial iron to 80 degrees for preheating. After the preheating is completed, place a rectangular Teflon cloth on the underside of the iron for ironing back and forth on the teeth.
7. Chisel
We recommend using hard objects to help us remove the glue left on the teeth and make the teeth press.
8. Edge banding
Stick the edge cloth to the left and right sides of the joint, and press it with an iron."
