In modern electronics manufacturing, Electrostatic Discharge (ESD) is the invisible enemy. A discharge as low as 30 volts can damage sensitive microchips, while the human body often feels nothing below 3,000 volts. If your assembly line is still using standard PVC belts, you are likely losing thousands of dollars every month to latent defects and premature product failures.
At Annilte, we have engineered a specialized anti-static PVC conveyor belt designed specifically for the electronics assembly line. Our ESD-safe belt ensures that static charges are dissipated immediately, protecting your components from point A to point B.
The Problem: Most ESD damage doesn’t cause immediate failure. Instead, it weakens components, leading to early product returns, high warranty costs, and brand reputation damage. You cannot see it, but your quality reports feel it.
The Annilte Solution: Our belt features a controlled surface resistance of 10⁶ – 10⁹ ohms, providing a consistent path to ground. It dissipates static charges within milliseconds, preventing the buildup that causes latent damage.
The Problem: Cheap “anti-static” belts lose their properties after 3–6 months due to humidity changes, cleaning chemicals, or surface wear.
The Annilte Solution: We use permanent anti-static additives integrated into the PVC compound—not just a topical spray. Our belts maintain ESD compliance (ANSI/ESD S20.20) even after 24+ months of continuous use, regardless of humidity levels (tested from 15% to 85% RH).
The Problem: Many belts claim to be “anti-static” but fail in real production because they cannot be grounded effectively through standard pulleys.
The Annilte Solution: Our Annilte ESD safe belt is engineered with a conductive layer and a smooth back that works seamlessly with grounding combs and standard metal pulleys. Our technical team provides a free grounding diagram with every order.
The Problem: Mis-tracking belts cause edge fraying and generate static-inducing dust particles that contaminate cleanrooms.
The Annilte Solution: We manufacture our belts with a spiral interwoven fabric base and a precision-ground PVC cover. This ensures straight tracking and virtually zero dust generation—ideal for hard disk drive, smartphone, and PCB assembly lines.
| Parameter | Value |
|---|---|
| Material | PVC + Permanent Anti-Static Agent |
| Surface Resistance | 10⁶ – 10⁹ Ω (23°C, 50% RH) |
| Grounding Method | Via pulley / conductive comb |
| Tensile Strength | ≥ 150 N/mm |
| Elongation at Break | ≤ 15% |
| Operating Temp | -10°C to +80°C |